Selection tool/Check your application

Valve automation selection tool

Choose an actuator, controls or accessories - separately or together.

My valve torque

Enter a single valve torque, or expand the optional details below.

Torque requirements
Optional: choose your controls

Based on the operating action above. Leave undecided options open for your RFQ.

Not sure? View the control arrangement flowchart ↗Opens in a new tab; your selections stay here.

Accessories

Limit switch
Lockout
Declutchable

Your control choices update the selection and inquiry below automatically; unspecified choices remain open for review. Explore the control arrangements ↗

Optional: MAST & detailed valve torques

If provided, MAST limits the selection. In detailed mode, use the MAST field below.

Supply all six valve torque points in the selected torque units. MAST is an optional additional check. Missing values are not treated as zero.

Running-torque position: this preliminary check assumes RTO and RTC occur at 50% of their respective opening and closing strokes. Use this default only when the valve manufacturer does not specify a position. If a different position is specified, send the torque curve to Easytork for review rather than relying on this result.

Mounting and service suitability remain separate checks.

How to use this preliminary check

Applies to valve torque, MAST, all six torque points and minimum air pressure. Mounting dimensions have their own unit selector.

Not sure about torque, pressure or operating action? Leave it open and continue. We can help with the missing details.

Use the applicable torque requirement throughout valve travel.

Check mounting fit (optional)

Find a valve (optional)

Choose a known valve, or enter dimensions yourself →

Search the valve index

Choose a valve, or continue without one.

View or edit mounting dimensions

Or enter your valve dimensions below. All fields are editable.

Which dimensions do I need?
Valve mounting dimensions: bolt circle, stem projection and stem profile, with separate drawing checks for bolts, engagement and clearance.

Open full-size diagram →

Use the actual valve drawing. The nominal screen does not verify hole layout, fasteners, stem engagement or surrounding clearance.

Bore and key stem / drive profile
Manufacturer-specified stem outside dimensionIllustrative stem cross-section with a projecting key. Dotted outer boundary and dimension guide show the outside extent, not the bore diameter.Stem outside dimension
Use the outside dimension specified on the valve manufacturer’s stem drawing.
Valve stem profile & mounting dimensions

This requests a reference screen, not an RFQ. No contact details are required here.

Need a confirmed selection?

For reference only, not a promise of fit or performance. Easytork must review the valve, actuator, mounting arrangement and application. Contact us for an RFQ; submitting an RFQ alone does not confirm compatibility.

Contact Easytork →