Equipment and skid layouts
Match the rotary control valve to the installation's available envelope and operating duty.
Complete pneumatic rotary control valve packages configured around your application.
Efficient actuation can reduce the size and weight of the overall assembly. Stored-air fail-safe eliminates the return-spring load that drives actuator upsizing.
| Easytork actuator | Neles B1J actuator | Minimum fail-safe torque (in-lb) | Less actuator mass |
|---|---|---|---|
| EVA0514 6.1 lb | B1J6 28.5 lb | EVA0514: 301 B1J6: 319 | 22.4 lb |
| EVA0717 12.7 lb | B1J8 37 lb | EVA0717: 697 B1J8: 620 | 24.3 lb |
| EVA1022 23.1 lb | B1J10 66 lb | EVA1022: 1,395 B1J10: 1,328 | 42.9 lb |
| EVA1227 48.9 lb | B1J12 126 lb | EVA1227: 2,974 B1J12: 2,655 | 77.1 lb |
| EVA1436 86.1 lb | B1J16 220 lb | EVA1436: 4,956 B1J16: 5,310 | 133.9 lb |
Minimum fail-safe torque at 58 psi (4 bar), from different torque curves. Actuator-only weights.
A published truck installation shows Easytork actuation within closely packed pipework.
Review space, weight, valve duty and service access together for your equipment.

A skid manufacturer needed valve actuation that met both space and weight limits. For one duty, the published case reports that a cavity-filled seat doubled the valve’s original torque requirement. Tri-clamp connections made added mass a concern, and additional frame bracing was not practical for that design.
The manufacturer selected Easytork actuation for skid services including water, ink, air and solvents, with installations beginning in 2016. The original brochure compares actuator envelopes and weight per unit of torque for the illustrated arrangements.
Match the rotary control valve to the installation's available envelope and operating duty.
Review the complete valve assembly around the equipment's space, weight and process requirements.
Include control accessories, piping connections and maintenance clearance in the fit review.
Compare appropriately matched fail-safe assemblies around the same process valve. Efficient vane motion and stored-air fail-safe can reduce the required actuator size and weight.
Direct rotary movement keeps actuation compact. For a suitably matched duty, less actuator bulk can reduce the complete assembly's size and weight.
Stored air powers return motion without a return-spring pack to work against. For the required fail-safe torque, this can reduce spring-related actuator upsizing.
A smaller, lighter matched assembly can free up space on a skid or vehicle and help meet equipment weight limits.
Compare torque requirements and stored-air return before comparing physical envelopes.
Tell us about your control valve application and what you’d like to improve: reliability, speed, size, weight or low-pressure operation.
Discuss a smaller, lighter assemblyinfo@easytork.com+1 (314) 266-6880