HARSH ENVIRONMENTS

Pneumatic rotary control valves engineered for harsh environments.

Intrinsically keep surrounding air-and the contaminants it carries-out of your actuator.

Protect the complete control valve.

Actuator internals can deteriorate from the inside out when a breathing spring chamber draws in dusty, damp or corrosive surrounding air.

Keep contaminants out intrinsically. It helps protect actuator internals from dust, moisture and corrosive ambient air.

A SPRING PROVIDES FAIL ACTION

Ambient-breathing spring-return arrangement

An expanding vented spring chamber can draw in surrounding dust, moisture or corrosive air.

Spring-return example

STORED AIR PROVIDES FAIL ACTION

Easytork stored-air fail-safe

The reservoir charges from supply air during normal operation. Stored supply air powers fail-safe motion without that ambient intake path. See how this arrangement avoids drawing surrounding air into the actuator.

See the difference in action.

Dirty air and airborne particles

Cement plants, coal and ash-handling systems, and steel mills expose actuators to airborne dust, ash and other contaminants.

Outdoor weather and moisture

Humid and coastal sites can expose actuation to moisture and salt-laden air. Easytork pneumatic control valves are installed at a coastal refinery in India.

Corrosive air

For chemical plants and wastewater installations where surrounding air contains corrosive gases such as H2S.

A PUBLISHED INSTALLATION

Steel-mill cooling-spray service.

Real Easytork valve actuation in steel-mill cooling-spray service, exposed to dirty air, airborne contaminants and corrosion.

Easytork reports a long-running installation in this dirty, corrosive environment.

Easytork steel-mill cooling-spray installation with rotary actuators and process pipes visibly covered in dust, beside mist and glowing process equipment.
Published Easytork steel-mill installation with dirty-air and corrosive exposure. View the public installation post
AN OUTDOOR INSTALLATION

Truck-mounted valve automation.

A published Easytork installation shows valve actuation in an outdoor vehicle setting. Transportation actuation can face rain, sleet and snow.

Avoiding contaminated ambient-air intake helps protect the actuation within the complete control valve.

Published bulk tanker truck installation outdoors, with an inset showing a red Easytork actuator in truck-mounted pipework.
Truck-mounted valve automation in an outdoor vehicle installation. Photo: Greg Miller, published by Easytork, July 2021. View the public post
A PUBLISHED APPLICATION EXAMPLE

Actuation deep underground.

A Canadian gold mine used Easytork actuation for paste fill, mine dewatering and process-water feed. Surface compressors supplied equipment through air lines extending 3,000–4,000 feet underground, where moisture and rust made maintenance difficult.

Easytork’s published 2015–2017 account reported problem-free actuation during that period.

This site record involved both poor supply-air quality and harsh surrounding air. Clean, filtered actuator supply remains required.

Original published montage of Easytork rotary actuators in underground Canadian gold-mine pipework.
Mining installation. Read the published case · Source PDF
APPLICATION EXPERIENCE

Food & beverage application experience

Easytork has served food-processing customers for years, helping address actuator challenges in wet and washdown environments. In 2020, one food processor reported that it was converting three facilities to Easytork actuators.

An exterior swab checks the surface sampled; it does not establish the condition inside an actuator. In an ambient-breathing design, cycling can draw surrounding air and its contaminants into the actuator. Easytork's integrated stored-air design intrinsically avoids that ambient-intake pathway in the configured closed-loop arrangement.

See how the fail-safe actuation works

Airflow through the actuator and controls.

For the specified fail-safe configuration, a closed-loop arrangement pairs the Easytork actuator with ESV, EPV or NTV. Confirm the selected combination for your application.

Published application examples

Transportation applications

Easytork’s transportation application discussion covers winter exposure and road-treatment chemicals, alongside tight space and weight constraints.

Read the published transportation discussion

WHY EASYTORK?

Complete rotary control valves engineered for long service life in harsh environments.

Protecting actuation helps the complete valve assembly keep doing its job in demanding surroundings.

Built-in protection for actuator internals

Protected actuation helps the valve, actuator and controls work together for intended long service life in demanding surroundings.

Select the package for the exposure

Valve construction, Easytork actuation, selected controls and position feedback configured around the actual service.

Closed-loop fail-safe operation

Stored supply air powers the fail-safe stroke without drawing contaminated surrounding air into the actuator.

Understand the actuator air path

See how stored supply air avoids drawing contaminated surrounding air into the actuator.

CONTACT EASYTORK

Tell us what your
control valve is exposed to.

Start with your headache.

Tell us about your control valve application and what you’d like to improve: reliability, speed, size, weight or low-pressure operation.

Tell us about your environment+1 (314) 266-6880