Home/K-TORK torque comparison
EXISTING VANE ACTUATOR?
Compare the torque.
See the nearby sizes.
Find the Easytork sizes immediately below and above a K-TORK model’s published torque at the same pressure.
This is a torque comparison, not a recommended replacement. Choose the actuator for your valve application, including the torque profile, safety factor, mounting, controls and service conditions.
← Back to replacement planningFail-safe torque comparison
K-TORK spring-return end torque is compared with Easytork stored-air minimum end-of-stroke torque. Understand spring configuration and charged-supply pressure → Spring configuration: 80 psi balance.
On a phone, swipe the table sideways. The K-TORK model stays visible.
| K-TORK model | K-TORK spring end End-of-stroke torque | Nearest EVA below Fail-safe end-of-stroke | Nearest EVA above Fail-safe end-of-stroke |
|---|---|---|---|
| KT-02 | -Not published in this table | Unavailable | Unavailable |
| KT-03 | 73 in-lb | No published size below | EVA-0411219 in-lb+200% vs K-TORK |
| KT-06 | 144 in-lb | No published size below | EVA-0411219 in-lb+52.1% vs K-TORK |
| KT-10 | 410 in-lb | EVA-0411219 in-lb-46.6% vs K-TORK | EVA-0514420 in-lb+2.4% vs K-TORK |
| KT-20 | 800 in-lb | EVA-0514420 in-lb-47.5% vs K-TORK | EVA-0717983 in-lb+22.9% vs K-TORK |
| KT-30 | 1,790 in-lb | EVA-0717983 in-lb-45.1% vs K-TORK | EVA-10221,963 in-lb+9.7% vs K-TORK |
| KT-40 | 3,762 in-lb | EVA-10221,963 in-lb-47.8% vs K-TORK | EVA-12274,127 in-lb+9.7% vs K-TORK |
| KT-50 | -Not published in this table | Unavailable | Unavailable |
| KT-60 | -Not published in this table | Unavailable | Unavailable |
Need to review a specific installation?
Plan a vane actuator replacement →
Bring the full model number, air pressure, valve torque requirements and mounting details.
Discuss your application →View the complete EVA torque tables →