Valve packages, actuator assemblies and application examples from Easytork’s installation gallery.
Explore installed Easytork configurations. Select a photograph to open the full image. For sizing, use the EVA torque tables. Process temperatures are not actuator ambient-temperature ratings.
Easytork actuator retrofit in a power-generation facility. Installed November 2026.
Private review candidate. Public photo permission still to be confirmed.
Before
After
Before-and-after power-generation retrofit.Easytork valve automation assembly, installation gallery image 1Easytork valve automation assembly, installation gallery image 2Easytork valve automation assembly, installation gallery image 3Easytork valve automation assembly, installation gallery image 4J-flow DM4500 1" to EVA-0411 with EPV and off-brand solenoid valve set for fail safeJ-flow DM4500 1" to EVA-0411 with EPV and off-brand solenoid valve (alt. view)J-Flow 2500 1-1/2" to EVA-0514J-Flow DM4523 1-1/2" to EVA-0514J-Flow ball valves direct mounted with Easytork actuatorsJ-Flow ball valves direct mounted with Easytork actuators (alt. view)Easytork actuators installed in oilfield, they fit where rack & pinions would NOTEasytork actuators installed in oilfield, they fit where rack & pinions would NOT (pt 2)J-Flow DM 2533F with Easytork actuatorJ-Flow DM 2533F with Easytork actuator (alt. view)Easytork Actuator vs. Rack and Pinion Size Comparison: Double Acting Air to Open Air to Close Why actuator volume matters →Easytork actuators installed on Val-Matic 2"-8" butterfly valvesEVA-1227 with YT-1000 Positioner3-Way Diversion System Controlled by EasytorkEasytork actuators/Flow-Tek packages, some modulatingEasytork actuator on a 3-way valve - modulating packageFailed springs Environmental exposure and the air path →6" 3-way assemblies (EVA-1022)Positioner Assemblies (EVA-1436)Z-Disc control valve (EVA-0514 actuator)Centrifuge fine control application Define good valve response →EVA-1227 with gearbox and air pilot valveEVA-1227 with gearbox on 6" American ball valveEVA-1022s in an acid plantTandem stacked EVA-1646's with 45,038 in-lb (double-acting) or 30,143 in-lb (fail-safe) at 80 psi. With on-board lockout device. Size comparison to EVA-0514.EVA-0717 on Kitz valve (angle 1)EVA-0717 on Kitz valve (angle 2)We offer complete automated Easytork valve packagesEasytork actuator driven by natural gas instead of airControl valve packages with Easytork actuatorsEVA-1436/1646 tandem units (~36,000 in-lb torque) on dampersEVA-1436 control valve unit for hot gas service of up to 700 degrees FEasytork actuator direct mounted to valve and Stonel switchEasytork actuators at a food plantEasytork actuators installed on a space rocket multi engine test standEasytork actuators installed at a power plant8" 600# Chromatic Valve with EVA-1646 for fail safe modulationEVA-1646s for fail safe modulationMunicipal facilityECAs (replaced spring & diaphragms) on Fisher control valves Easytork is the sole warrantor of the ECA product and is NOT affiliated or endorsed by Fisher, or any other Emerson Process Management CompanyForum Energy Technologies' Forumix Line (photo courtesy of F-E-T)EVA-1022 being installed as a problem solverEasytork 3” fail-safe control valve packages have control loop speed of 0.7s for the full stroke with very accurate controlAutomated fail-close butterfly valve packagesEasytork installed for hand sanitizer projectEVA-1436 direct mounted on 12" Valmatic AWWA plug valveTandem 1646sEasytorks in sanitizer project (part 2)ECA (set for fail closed) on a 1-1/2” segmented control valve is under 40 lbsStart-up at a WTPEasytork direct mounted on a non-ISO butterfly valve with gearbox and positioner on topEasytork control valves3" Easytork control valve packages assembled for fail-closed3" Easytork control valve packages assembled for fail-closed (part 2)8" Easytork control valve package being assembled and tested8" Easytork control valve packages